The converter is designed for convenient operation with PluraSens® series devices. The converter uses a 90...265 VAC main power supply.  Features - USB 2.0 - Serial interface RS485 - Power supply: mains...

Model E6212 PID controller with two universal inputs is designed for measurement and regulation of temperature, pressure, humidity, weight or other parameters. The controller has RS485 digital interface with Modbus ASCII/RTU communication protocols supporting baud-rates up to 115,2 kbit/s. Thanks to a special control mode, the E6212 controller enables one to reach...

E7110-8A eight-channel analog input module measures and converts analog signals from common RTDs, thermocouples or 4-20 mA transmitters to digital data.  The module has an RS485 interface, supports industry-standard Modbus RTU / ASCII protocols as Modbus Slave unit and can be used in a variety of automation...

Model E6500 is a 1/8 DIN size panel mount controller, designed for accurate temperature measurement and regulation in a large variety of applications and industries. Universal input supports Pt50, Pt100, Pt500, Pt1000, Ni500 and Ni1000 RTD sensors in two, three or four-wire circuit, or thermocouple types B, J, K, N, R, S or T with internal cold junction...

Heat flux transmitter E2007HF is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is designed to measure the heat that flows through the object in which or on which the heat flux sensor plate is mounted. The heat flux is measured by a thermopile plate sensor element. E2007HF can be used for in-situ measurement of...

Air Quality Wireless Datalogger Panel  E2230 is intended for use in schools, hospitals, offices and other areas. The device provides autonomous long-time monitoring of indoors climate with high accuracy and stability. The datalogger uses the latest achievements in digital humidity and temperature sensing and low-power NDIR CO2 sensing technologies, providing...

Evikon Lumber moisture transmitter E2353 is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for the measurement of timber moisture during kiln drying. Moisture content (MC) detection is based on the measurements of electrical conductivity. The device uses robust stainless steel screw...

Programmable transmitter E2163 with 4-20 mA current output is designed for mounting into DIN Form B terminal head of a temperature sensor or into IP65 rated enclosure to the wall. The transmitter is intended for signal conditioning of most common resistance temperature detectors – Pt100, Pt500, Pt1000, Ni100, Cu50, Cu100, and most common...

Daniamant W4-A Automatic Alkaline Lifejacket Light The Alkaline lifejacket light is SOLAS and MED approved and offers an alternative to the traditional lithium-powered light. Featuring the ability to run for more than 60 hours in ambient conditions, the new lifejacket light will also fit existing recessed receptacles and belt...

Humidity and temperature transmitter E2227 is intended for measurement of relative and absolute humidity, temperature and dew point value of air with high accuracy and stability. The transmitter is designed for indoor use, target applications being home and office HVAC and building automation systems. Compact wall-mount slotted plastic enclosure...

Evikon Humidity and temperature transmitter E2218 is a member of the new PluraSens family of multifunctional measurement instruments. The transmitter is intended for measurement of relative and absolute humidity, temperature and dew point value in air and non-aggressive gases with high accuracy and stability. E2218 features two freely configurable analog outputs...

Evikon Humidity and temperature transmitter E2218-DM is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of relative and absolute humidity, temperature and dew point value in air and non-aggressive gases with high accuracy and stability. E2218-DM features two freely configurable analog...

Humidity and temperature transmitter E2228 is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of relative and absolute humidity, temperature and dew point of air and non-aggressive gases with high accuracy and stability. The instrument is available in different enclosures for indoors and...

Evikon Duct-mount humidity and temperature transmitter E2228-DM is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of relative and absolute humidity, temperature and dew point of air and non-aggressive gases with high accuracy and stability. The instrument is available...

Evikon E2713 Magnetic Float Level Switch Transmitter Features - Min, Max, Min+Max or up to five level setpoints - Full stainless steel construction - NO, NC or changeover contacts - M12 connector or cable output - Water, beverages, oil, diesel level control in tanks <table border="1"...

Digital sensors with serial interfaces Evikon E2700 family of level transmitters with digital interfaces is specially designed for precision fuel level measurement in the vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology,...

Evikon E2700 family of level transmitters with digital interfaces is specially designed for precision fuel level measurement in the vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and fully digital signal processing ensure stable, accurate and...

E2706 with CAN interface and 0...10 V analog output is the latest addition to the Evikon E2700 family of digital level transmitters, designed for precision fuel level measurement in the vehicle and stationary tanks. Applications include vehicle tracking, AVL and fleet management systems. Highly sensitive capacitive technology, robust construction and fully digital...

Barometric pressure transmitter E2407 is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of the barometric pressure in residential, business and industrial indoor spaces. RS485 Modbus RTU interface allows direct Fieldbus networking of the device. Two configurable analog outputs can be...

Differential pressure transmitter E2408DF is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for the measurement of low pressure of air and non-aggressive gases in HVAC applications. RS485 Modbus RTU interface allows direct Fieldbus networking of the devices and optional analog output...

Differential pressure transmitter E2418DP is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for the measurement of low pressure of air and non-aggressive gases in HVAC applications. RS485 Modbus RTU interface allows direct Fieldbus networking of the devices and optional analog output can be used to...

Introducing the Msa  Altair 5x portable gas detector. Driven by msa xcell sensor technology. 100%. Sensors on the market. The most advanced. 100% .a piece of equipment used is oil and gas and industrial applications for hazardous gas detection, suitable for marine and shipping vessels, oil rigs mining operations and special products.