A pilot ladder is one type of rope ladder specially designed for the use of marine industry while embarking and disembarking pilots. It is consists of hardwood steps, spreader steps (Preventer Step), rubber steps, manila ropes, thimble spliced eyes and steps fixing pieces. Holding magnets are compulsory to keep the ladder lean against the ship's hull to prevent...

Evikon ET4xx-S011 family of long stem thermometers is designed for temperature measurement at several meters depth in fuel oil tanks, peat or compost pits and other similar applications.  Thermometer versions Evikon ET432-S011 stem length L = 2 m, round tip, weight 500 g Evikon ET433-S011 stem length L = 3 m, round tip, weight 700 g Evikon...

Lalizas pilot ladder is one type of rope ladder specially designed for the use of marine industry while embarking and disembarking pilots. It is consists of hardwood steps, spreader steps (Preventer Step), rubber steps, manila ropes, thimble spliced eyes and steps fixing pieces. Holding magnets are compulsory to keep the ladder lean against the ship's hull to...

The addressable µLAN switch manages communication and power between the main branch and sub-branches of the digital 1-wire µLAN sensor network. Thus µLAN master device can control multiple sub-networks without conflict and the overall network load and power consumption are substantially reduced. E3103 is fully encapsulated into a...

Our Spilltask 120 Litre Oil Emergency Spill Kit Station  is primarily for outdoor use for dealing with oil, hydrocarbons, solvents and other organic liquids spill. Ideal for use: at bulk fuel...

E7708 controller operates as a 1-wire master device, performing µLAN network analysis and regularly polling for data from 1-wire sensors from multiple sub-networks without conflict. The instrument implements dynamic register assignment for sensors data, allowing to build very flexible and complex 1-wire digital sensor networks with multi-level µLAN topologies. A...

Our Spilltask 120 Litre Chemical Emergency Spill Kit Station  is primarily for outdoor use for dealing with chemical, hydrocarbons, solvents and other organic liquids spills. Ideal for use: at bulk fuel and chemical storage <span...

E7110-8I analog output module generates eight independent 4-20 mA signals according to incoming digital data. The module features an RS485 interface , supports industry-standard Modbus RTU / ASCII protocols as a Modbus Slave unit and can be used in a variety of automation systems at the Fieldbus level together with PLCs, HMIs or SCADA systems. ...

E7110-8R relay output module controls eight independent electromagnetic relays according to incoming digital data. The module features an RS485 interface, supports industry-standard Modbus RTU / ASCII protocols as a Modbus Slave unit and can be used in a variety of automation systems at the Fieldbus level together with PLCs, HMIs or SCADA systems. Each relay...

The Garrett SuperScanner Hand Held Metal Detector is an ideal solution for the detection of concealed metallic items at Airports, Ports, Prisons and other Public &amp; Corporate facilities. The  Garrett SuperScanner Hand Held Metal Detector  is the evolution of the world's most popular hand-held metal detector. Originally designed...

E7110-8D4R digital input/output module detects states of eight logical inputs, counts input pulses and controls four independent electromagnetic relays according to incoming digital data. The module features an RS485 interface, supports industry-standard Modbus RTU / ASCII protocols as a Modbus Slave unit and can be used in a variety of automation systems at the...

Model E6202 two-channel controller process regulator is designed for measurement and regulation of temperature, humidity, pressure or other parameters. The controller has an RS485 interface supporting Modbus ASCII or RTU protocol. Evikon E6202 Two-channel controller process regulator...

The converter is designed for convenient operation with PluraSens® series devices. The converter uses a 90...265 VAC main power supply.  Features - USB 2.0 - Serial interface RS485 - Power supply: mains...

Model E6212 PID controller with two universal inputs is designed for measurement and regulation of temperature, pressure, humidity, weight or other parameters. The controller has RS485 digital interface with Modbus ASCII/RTU communication protocols supporting baud-rates up to 115,2 kbit/s. Thanks to a special control mode, the E6212 controller enables one to reach...

E7110-8A eight-channel analog input module measures and converts analog signals from common RTDs, thermocouples or 4-20 mA transmitters to digital data.  The module has an RS485 interface, supports industry-standard Modbus RTU / ASCII protocols as Modbus Slave unit and can be used in a variety of automation...

Model E6500 is a 1/8 DIN size panel mount controller, designed for accurate temperature measurement and regulation in a large variety of applications and industries. Universal input supports Pt50, Pt100, Pt500, Pt1000, Ni500 and Ni1000 RTD sensors in two, three or four-wire circuit, or thermocouple types B, J, K, N, R, S or T with internal cold junction...

Heat flux transmitter E2007HF is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is designed to measure the heat that flows through the object in which or on which the heat flux sensor plate is mounted. The heat flux is measured by a thermopile plate sensor element. E2007HF can be used for in-situ measurement of...

Air Quality Wireless Datalogger Panel  E2230 is intended for use in schools, hospitals, offices and other areas. The device provides autonomous long-time monitoring of indoors climate with high accuracy and stability. The datalogger uses the latest achievements in digital humidity and temperature sensing and low-power NDIR CO2 sensing technologies, providing...

Evikon Lumber moisture transmitter E2353 is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for the measurement of timber moisture during kiln drying. Moisture content (MC) detection is based on the measurements of electrical conductivity. The device uses robust stainless steel screw...

Programmable transmitter E2163 with 4-20 mA current output is designed for mounting into DIN Form B terminal head of a temperature sensor or into IP65 rated enclosure to the wall. The transmitter is intended for signal conditioning of most common resistance temperature detectors – Pt100, Pt500, Pt1000, Ni100, Cu50, Cu100, and most common...

Daniamant W4-A Automatic Alkaline Lifejacket Light The Alkaline lifejacket light is SOLAS and MED approved and offers an alternative to the traditional lithium-powered light. Featuring the ability to run for more than 60 hours in ambient conditions, the new lifejacket light will also fit existing recessed receptacles and belt...

Humidity and temperature transmitter E2227 is intended for measurement of relative and absolute humidity, temperature and dew point value of air with high accuracy and stability. The transmitter is designed for indoor use, target applications being home and office HVAC and building automation systems. Compact wall-mount slotted plastic enclosure...