Best Way For Handling Industrial Power Tools

A tool is an instrument or a device used or worked by hand or machine to carry out works or a given task. Industrial Tools can be hand or power tools. Hand tools are those used without electricity e.g. Hammers, Pliers, Ladders, Wrenches, Clamps, etc. while Power tools are operated with electricity. 

Industrial Power tool is a tool that is actuated by an additional power source and mechanism other than the solely manual labor used with hand tools, it is a common part of our everyday lives and is present in almost every industry. It is widely used for industries and construction operations because it aids in giving a better job within a short time. 

However, power tools can be very hazardous if misused, It has more harm on people’s lives than Hand tools, it has a very high rate of incidence occurring, but if proper measures are applied the risks of incidence are less. Power tools include Drills, Saws, Power sandals, Nail guns, compressors, Lathes, etc.

INCIDENCE WHICH LEADS TO POWER TOOLS ACCIDENTS

We have several incidences which lead to power tools accidents but the major ones are out-listed here. Which includes:

1. Many accidents happen because people are careless with their tools. When you attempt to do a wrong job with the wrong tool or when laid down procedures for handling tools, machines, and other facilities are not allowed accidents often occur.
2. When a tool or equipment is faulty and the working environment constitutes a danger to the user and the absence of safety devices an unsafe condition exists because it can lead to great danger.
3. Lack of experience could lead to harm, when a beginner mishandles a tool or machine it could lead to damage of the machine or his/her life could be at risk.

BASIC TIPS FOR HANDLING INDUSTRIAL POWER TOOLS

1. Always use the right tool for the right operation. Using the wrong tool can damage the tool and the work can also lead to an accident.
2. Clean the tools after use and store them in an orderly manner to avoid rust and scratch which would affect the tool badly
3. Do not leave tools or materials scattered all over the workshop in order not to get harmed by them 
4. Avoid using any tool or machine if u can’t properly handle it well
5. Talking to anyone while operating a machine is a distraction that can cause an accident
6. Blunt tools may cause accidents because greater force is needed to use them
7. Wear safety clothes while working(Personal Protective Equipment, PPE)

In our world today, power tools are at more advantage than hand tools because they are convenient, used to carry out tasks efficiently, faster, and easy to use by the user. 

They are widely used in industries, for construction, and also in the garden, etc., it is hazardous if the safety rules are not applied properly therefore the safety measures should be maintained. 

We are going to list out other safety tips you need to know for the best way for handling industrial power tools which include electrical power tools, pneumatic tools. 

SAFETY TIPS FOR ELECTRICAL POWER TOOLS

1. Never hold fingers on the switch button while carrying a plugged-in tool to avoid accidental starting.
2. Use a ground fault circuit interrupter (GFCI) or an assured grounding program.
3. Keep floors clean and dry to avoid slipping while working with or around dangerous tools.
4. Never use electric tools in wet conditions only if approved for that use.
5. Keep and maintain tools with care for best performance.
6. Never shake the cord or the hose to avoid it been disconnected from the receptacle.
7. Always keep good footing and maintain a good balance when operating power tools.
8. Always remember to disconnect tools when not using them, before cleaning and servicing them and when changing accessories such as blades, bits, and cutters.
9. Avoid contact with people not involved with the work at a safe distance from the work area.
10. Keep to instructions in the user’s manual for lubricating and changing accessories.
11. Secure work with clamps or a vise, freeing both hands to operate the tool.
12. Do not carry a tool by the cord or hose.

SAFETY TIPS FOR PNEUMATIC POWER TOOLS.

1. Always wear eye protection.
2. Do not store a loaded air gun.
3. Never leave your tool unattained.
4. Do not point a compressed air gun at yourself or another person.
5. When you are finished using the tool, make sure that the pressure is released before you break the hose connections.
6. Use screens to protect nearby workers from flying fragments.
7. Confirm that all parts of the tool are fastened securely before use.
8. Use a safety clip or retainer to prevent attachments from being ejected during operation, and use a chip guard when using high-pressure compressed air for cleaning.  Be sure to limit the nozzle pressure to a good rate.

Getting the best safety tools makes your Job perfect and easy, we are at your service. We sell the best safety tools or equipment and always out for your safety. 

For more enquiries, shop industrial power tools online from major suppliers in Nigeria. You can also contact us at Industries Safety Nigeria.