an industrial safety & marine products distribution company
an industrial safety & marine products distribution company
UNITOR™ Coldwash HD™ is a heavy duty degreaser based on petroleum solvents, emulsifying agents and surfactants. This product is excellent for use on soiled surfaces, bilges and machinery parts, engine parts and bilges. It is very easy to use as it splits after cleaning, releasing the oil phase for reclamation.
Product information
UNITOR™ Coldwash HD™ splits after cleaning, releasing the oil phase for reclamation. Powerful degreaser with quick penetration and good emulsifying properties. The emulsifying agents in this product are biological degradable. Does not contain nonylphenol ethoxylates or other estrogenic compounds. Effective on mineral oils and petroleum based residues. Safe to use on most metal surfaces and painted surfaces. Removes oil contamination from machinery, engine parts and bilges. Soak cleaning of machinery parts. Rapid rinsing, leaves clean and oil-free surfaces.
Features
Benefits
Specification
Invent Hazard Material (IMO/EU) classification | C-49 |
---|
Appearance | Clear brown |
---|---|
Density [g/ml] | 0,90 |
Flash Point [°C] | Above 61 oC |
Form | Liquid |
Not Compatible | May swell rubber and synthetic rubber. |
---|
Splits after cleaning, releasing the oil phase for reclamation. Powerful degreaser with quick penetration and good emulsifying properties. The emulsifying agents in this product are biological degradable. Does not contain nonylphenol ethoxylates or other estrogenic compounds. Effective on mineral oils and petroleum based residues. Safe to use on most metal surfaces and painted surfaces. Removes oil contamination from machinery, engine parts and bilges. Soak cleaning of machinery parts. Rapid rinsing, leaves clean and oil-free surfaces.
Directions for use
This product is excellent for use on soiled surfaces, bilges and machinery parts.
This degreaser must be applied neat with a brush, by hand spray, immersion, soaking etc. The contact, or soaking, time should be between 15 minutes to 2 hours before washing off with hot or cold water. Hot water will improve the result of the cleaning.
Spot cleaning
Spray neat Coldwash HD onto surfaces to be cleaned. The contact time should be at least 30 minutes or up to 2 hours if time allows. Bulkheads/walls can be washed down by use of high pressure cleaning machines. The best result is achieved with hot water between 60–80°C.
Spray method
Spray Coldwash HD neat onto soiled surfaces. The contact time should be between 15–30 minutes, and then wash off with water. To clean stubborn deposits, mechanical agitation such as scrubbing will improve the cleaning.
Soak method
Immerse the parts to be cleaned into a bath of neat Coldwash HD for 30 minutes, and then wash off with water.
Circulation method
Cleaning of equipment such as lube oil heat exchangers, fuel oil preheaters and filters can be accomplished by circulating neat Coldwash HD.
Further Technical data
Form |
Liquid |
---|---|
Appearance |
Clear brown |
Density |
0,90 |
Flash Point |
Above 61 oC |
Not Compatible |
May swell rubber and synthetic rubber. |
Product number: 571430
You can call our order hotline 09093333374 for order proceedings or our office number 013428636 or send us an email to sales@safetynigeria.com
Specific References
This product is genuine without any form of adulteration its tested and trusted, i recommend it for all industrial usage, No cause for alarm you are Always Secured with Industrial Safety Nigeria product and services.
Genuine industrial Product.
This product is genuine without any form of adulteration its tested and trusted, i recommend it for all industrial usage, No cause for alarm you are Always Secured with Industrial Safety Nigeria product and services.