an industrial safety & marine products distribution company
an industrial safety & marine products distribution company
Weicon Zinc Spray 400 ml, IMPA 450811
Weicon Zinc Spray Bright Grade 400 ml, IMPA 450811, the Approved Rust Protection is Heat-Resistant and is Suitable as a Primer for Metal Fast Drying Light Grey galvanizing.
Long-term cathodic corrosion protection (> 550 hours salt-spray test acc. to DIN 53167 and DIN 50021) for all metal surfaces. For priming and touching up hot galvanized parts.
-
Secured
-
Fast Delivery
-
7 days Return
PROPERTIES - WEICON Zinc Spray Bright Grade provides all metal surfaces with permanent cathodic corrosion protection. It forms a fast-drying, firmly adhering protective layer of fine zinc particles.
DETAILS - Heat resistance: -50°C to +500°C / Dust dry after 15min / Fully cured after 24h / Abrasion resistant / Suitable for indoor and outdoor use / Colour: Light grey"matched to hot-dip galvanizing.
APPLICATION AREA - WEICON Corrosion Protection is suitable as primer / primer / sealant / adhesion primer / underbody protection / protective varnish for welding, drilling points / cars / gutters / fences, etc.
QUALITY - 100% German Quality - The Weicon zinc spray exceeds the requirements of DIN EN ISO 1461 and protected metal parts treated in tests against any corrosion even after more than 1050 hours.
ADDITIONAL PRODUCTS - WEICON Surface Cleaner for cleaning and grease removal before using WEICON Zinc Spray.
Danger
- Causes serious eye irritation.
- Extremely flammable aerosol.
- May cause drowsiness or dizziness.
- Pressurized container: May burst if heated.
- Toxic to aquatic life with long-lasting effects.
Specific References
New product
No customer reviews for the moment.
You might also like
20 other products in the same category:
Weicon Zinc Spray Bright Grade 400 ml, IMPA 450811, the Approved Rust Protection is Heat-Resistant and is Suitable as a Primer for Metal Fast Drying Light Grey galvanizing.
Long-term cathodic corrosion protection (> 550 hours salt-spray test acc. to DIN 53167 and DIN 50021) for all metal surfaces. For priming and touching up hot galvanized parts.