Evikon E2713 Magnetic Float Level Switch Transmitter Specifications

Number of floats: one to five (min distance 35 mm)

Stem length: from 50 mm to 3000 mm

Process connection: M16 thread, inside mounting

Accuracy of setpoint: ± 3 mm

Evikon E2713 Magnetic Float Level Switch Transmitter Typical versions

E2713-11-L1-35: one float, one setpoint (Max or Min) at distance L1 from top

E2713-12-L1-L2: one float, two setpoints, Max at distance L1 from the top, Min at distance L1+L2 from top

E2713-22-L1-L2: two floats, two setpoints, Max at distance L1 from the top, Min at distance L1+L2 from top

E2713-33-L1-L2-L3: three floats, three setpoints, First at distance L1 from the top, Second at distance L1+L2 from the top, Third at distance L1+L2+L3 from top

Contact forms: SPST NO - normally open, SPST NC - normally closed, SPDT - switchover on request

Switching power: 10 VA standard, 30 / 50 VA on request

Switching current: 0,5 A

Switching voltage: 200 V AC/DC standard, 350 V AC/DC on request

Wetted parts: AISI316 / V2A stainless steel/PA, IP68

Float material: V2A stainless steel for liquids with density > 0.9 g/cm3 polyamide for liquids with density < 0.9 g/cm3

Cable (option S3): FEP / silicone insulated standard length 3 m

Connector (option M12): M12 type A, IP68

Process temperature: -40...+130 °C (with stainless steel float)

                             -10...+90 °C (with PA float)

Ambient temperature: -40...+130 °C (cable),

                                -40...+85 °C (M12 connector)

For the M12 connector, only one switch-over contact is available