an industrial safety & marine products distribution company
an industrial safety & marine products distribution company
Evikon E2218-DM Duct Mount Humidity & Temperature Transmitter
Evikon Humidity and temperature transmitter E2218-DM is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of relative and absolute humidity, temperature and dew point value in air and non-aggressive gases with high accuracy and stability. E2218-DM features two freely configurable analog outputs 4-20 mA / 0-10 V and RS485 Modbus RTU interface for direct Fieldbus networking. The sensors are located at the tip of a 200 mm long stem, intended for insertion into ventilation air ducts.
Evikon E2218-DM Duct Mount Humidity & Temperature Transmitter Features
- Mountable into ventilation airducts
- Relative/absolute humidity, dew point, T
- Industrial IP65 protected enclosure
- Two configurable 0-10 V / 4-20 mA outputs
- RS485 Modbus RTU digital interface
-
Secured
-
Fast Delivery
-
7 days Return
Evikon E2218-DM Duct Mount Humidity & Temperature Transmitter Specifications
Sensors: digital combined RH and T sensors
Measurement range: 0...100 %RH, -40...+85 °C
Calculated parameters: dew point, absolute humidity
Resolution: 0,1 %RH / 0,1 °C
Accuracy: ±2,5 %RH / ±0,3 °C ±1,8 % RH / ±0,3 °C on request
Response time: ~15 seconds
Self-diagnostics: full functionality check at start-up
Warm-up time: ≤ 1 s
Power supply: 11...30 VDC, nominal 24 VDC or 24 VAC ±10%
Power consumption: < 1,5 W
Digital interface: RS485, Modbus RTU protocol
Analog outputs: 2 × 4-20 mA / 0-10 V, user settable, freely configurable scales
Fieldbus interface: RS485, Modbus RTU protocol
Cable connections: screwless terminal blocks
Probe connector: round industrial M12, IP68
Enclosure: grey ABS, duct mount, protection class IP65
Mounting accessories: cable gland Ø25 mm
Dimensions: H82 × W80 × D55 mm
Operating environment: industrial indoor and outdoor places
Operating conditions: -40...+85 °C, 0...100 %RH
Sensor probe: Ø16×L200 mm, M12 plug, -40...+85 °C
Specific References
New product
10 other products in the same category:
Evikon Humidity and temperature transmitter E2218-DM is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of relative and absolute humidity, temperature and dew point value in air and non-aggressive gases with high accuracy and stability. E2218-DM features two freely configurable analog outputs 4-20 mA / 0-10 V and RS485 Modbus RTU interface for direct Fieldbus networking. The sensors are located at the tip of a 200 mm long stem, intended for insertion into ventilation air ducts.
Evikon E2218-DM Duct Mount Humidity & Temperature Transmitter Features
- Mountable into ventilation airducts
- Relative/absolute humidity, dew point, T
- Industrial IP65 protected enclosure
- Two configurable 0-10 V / 4-20 mA outputs
- RS485 Modbus RTU digital interface
customer support
For quality, genuineness, fast delivery and good customer support, I recommend industry safety Nigeria as No: 1 in meeting all of that need