an industrial safety & marine products distribution company
an industrial safety & marine products distribution company
Evikon E2353 Lumber Moisture Transmitter
Evikon Lumber moisture transmitter E2353 is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for the measurement of timber moisture during kiln drying. Moisture content (MC) detection is based on the measurements of electrical conductivity. The device uses robust stainless steel screw electrodes and FEP insulated connection cable to ensure stable operating under harsh conditions in drying kilns. Options with different length of electrodes and/or cable are available. The device has two user-configurable analog outputs and an RS485 digital interface with industry-standard Modbus RTU protocol to connect the transmitter to automation systems.
Evikon E2353 Lumber Moisture Transmitter Features
- Long-lasting stainless steel screw electrodes
- Timber temperature compensation
- Two 0-10 V or 4-20 mA outputs
- RS485 Modbus RTU digital interface
-
Secured
-
Fast Delivery
-
7 days Return
Evikon E2353 Lumber Moisture Transmitter Specifications
Measurement method: conductivity measurement with screw electrodes
Measurement range: 7...20 %H2O
Resolution: 0,01 %H2O
Accuracy: < ±1 %H2O
Response time: ~15 s
Power supply: 11...30 VDC, nominal 12/24 VDC,
Power consumption: < 0,5 W
Analog outputs: two 4-20 mA or 0-10 V, user settable
Digital interface: RS485, Modbus RTU protocol
Enclosure: grey ABS plastic, wall mount, protection class IP65
Dimensions: H82 × W80 × D55 mm
Operating conditions: -40...+85 °C, 0...100 %RH
Cable connection: industrial M12 connector, IP68
Electrode cable: FEP insulated, -50...+200 °C, thermocompensated, 2 connectors Ø4 mm, L5/10/15 m
Screw electrodes: stainless steel, hex KT11, A23-15, A23-25 hole Ø4 mm for connector length 15 / 25 mm
Specific References
New product
10 other products in the same category:
Evikon Lumber moisture transmitter E2353 is a member of the new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for the measurement of timber moisture during kiln drying. Moisture content (MC) detection is based on the measurements of electrical conductivity. The device uses robust stainless steel screw electrodes and FEP insulated connection cable to ensure stable operating under harsh conditions in drying kilns. Options with different length of electrodes and/or cable are available. The device has two user-configurable analog outputs and an RS485 digital interface with industry-standard Modbus RTU protocol to connect the transmitter to automation systems.
Evikon E2353 Lumber Moisture Transmitter Features
- Long-lasting stainless steel screw electrodes
- Timber temperature compensation
- Two 0-10 V or 4-20 mA outputs
- RS485 Modbus RTU digital interface
customer support
For quality, genuineness, fast delivery and good customer support, I recommend industry safety Nigeria as No: 1 in meeting all of that need