an industrial safety & marine products distribution company
an industrial safety & marine products distribution company
Fluke 1577 Insulation Multimeter
Key features
- Insulation test voltages 500 V, 1000 V
- Insulation test: 0.1 MΩ to 600 MΩ
- Auto discharge of capacitive voltage
- AC/DC Voltage
- DC millivolts
- AC/DC milliamps
- Resistance (0.1 Ω to 50 MΩ)
- Continuity
-
Secured
-
Fast Delivery
-
7 days Return
Key features
-
Insulation test voltages 500 V, 1000 V
-
Insulation test: 0.1 MΩ to 600 MΩ
-
Auto discharge of capacitive voltage
-
AC/DC Voltage
-
DC millivolts
-
AC/DC milliamps
-
Resistance (0.1 Ω to 50 MΩ)
-
Continuity
-
Three-year warranty
-
Remote probe, test leads, alligator clips
-
Rugged, utility hard case
-
Auto power off to save battery power
-
True RMS
-
Large display with backlight
-
Live circuit detection prevents insulation test if voltage > 30 V is detected for added user protection
-
CAT III 1000V, CAT IV 600V measurement category
-
Accepts optional Fluke TPAKTM magnetic hanging system to free your hands for other work
Product overview: Fluke 1577 Insulation Multimeter
Two powerful tools in one
The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.
Whether you work on motors, generators, cables, or switch gear, the Fluke 1587/1577 Insulation Multimeters are ideally suited to help you with your tasks and at a cost that is far less than buying the two products.
Specifications: Fluke 1577 Insulation Multimeter
|
Specifications |
||
|
Voltage DC |
Maximum voltage |
1000 V |
|
Accuracy |
±(0.2%+2) |
|
|
Maximum resolution |
0.001 V |
|
|
Voltage AC |
Maximum voltage |
1000 V |
|
Accuracy |
±(2%+3) |
|
|
Maximum resolution |
0.1 mV |
|
|
Current DC |
Maximum amps |
400 mA |
|
Amps accuracy |
±(1.0%+2) |
|
|
Maximum resolution |
0.01 mA |
|
|
Current AC |
Maximum amps |
400 mA |
|
Amps accuracy |
±(2.0%+2)* |
|
|
Maximum resolution |
0.01 mA |
|
|
Resistance |
Maximum resistance |
50 MΩ |
|
Accuracy |
±(1.2%+2) |
|
|
maximum resolution |
0.1Ω |
|
|
Insulation Test |
||
|
Minimum test current @ 1kΩ/V |
1 mA |
|
|
Test voltages |
500, 1000 V |
|
|
Maximum resistance per test voltage |
50 V |
|
|
100 V |
||
|
250 V |
||
|
500 V |
||
|
1000 V |
600 MΩ |
|
|
Maximum resolution per test voltage |
50 V |
0.01 MΩ |
|
100 V |
0.01 MΩ |
|
|
250 V |
0.1 MΩ |
|
|
500 V |
0.1 MΩ |
|
|
1000 V |
0.1 MΩ |
|
|
Accuracy per test voltage |
50 V |
±(3% + 5) |
|
100 V |
±(3% + 5) |
|
|
250 V |
±(1.5% + 5) |
|
|
500 V |
±(2.0% + 5) |
|
|
1000 V |
±(2.0% + 5) |
|
|
Environmental Specifications |
||
|
Operating temperature |
–20°C to +55°C |
|
|
Storage temperature |
-40°C to +60°C |
|
|
Humidity (without condensation) |
0% - 95% (10°C – 30°C) 0% - 75% (30°C – 40°C) 0% - 40% (40°C – 55°C) |
|
|
Operating altitude |
2000 m |
|
|
Safety Specifications |
||
|
Overvoltage category |
Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V |
|
|
Agency approvals |
2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V |
|
|
Mechanical and General Specifications |
||
|
Size |
203 x 100 x 50 mm (with holster) |
|
|
Weight |
624 g |
|
|
Warranty |
3 years |
|
|
Battery life alkaline |
Meter use |
1000 hours |
|
Insulation test use |
Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off. |
|
|
IP rating |
IP40 |
|
Specific References
New product
10 other products in the same category:
Related articles
-
Steps to carry out accurate calibration
Calibration is important because it helps ensure accurate measurements, and accurate measurements are foundational to...Continue Reading
Key features
- Insulation test voltages 500 V, 1000 V
- Insulation test: 0.1 MΩ to 600 MΩ
- Auto discharge of capacitive voltage
- AC/DC Voltage
- DC millivolts
- AC/DC milliamps
- Resistance (0.1 Ω to 50 MΩ)
- Continuity
Fluke 1577 Insulation Multimeter
highly compatible