Features

• Applied to marginally prepared surfaces (SSPC SP 2-3)

• Conforms to irregular shapes and profiles

• Can be applied to cold, wet surfaces

• Not affected by water, acid, salts, or soil organics

• Encapsulation of lead paint

• Contains no solvents

• Easy application from arctic to tropical temperatures

• Ready for immediate service after application

• Meets AWWA C217 Standard

• Over a sixty-five-year history of proven applications

Application

Brush or Spray

Application Instructions

Prepare surfaces by removing all loose scale, rust, or other foreign matter in accordance to SSPC SP2 "Hand Tool Cleaning" or SP3 "Power Tool Cleaning". A high-pressure water wash of 3,000 - 7,000 psi is also suitable. Apply a thin film of Denso Paste, which serves as a primer. Spirally wrap the tape with a minimum 1'' overlap. For severely corrosive environments, a 55% overlap is recommended. While wrapping, press air pockets out and smooth all lap seams. For additional mechanical protection, an overwrap may be used to increase impact strength and electrical resistance.

Irregular surfaces such as valves, flanges, etc. may require the use of Densyl Mastic or Denso Profiling Mastic. Refer to the product sheets for these specific products for information on application and selection.

SIZE are 2",4",6", 8" or 12"rolls single or by the case

Apply on hydraulic fittings, wet or dry pipes, flanges, valves, bolts, and related surfaces. Denso Densyl Tape is a non-woven synthetic fabric tape fully impregnated with a neutral petrolatum compound. It is applied by hand around metal surfaces and conforms to irregular shapes and profiles for complete covering and protection. Corrosion protection of Denso's Densyl Tape is proven and used throughout the Oil and Gas Industry, residential equipment, marine fishing vessels, and municipal equipment for corrosion prevention.

• -4°F to 158°F (70°C) service temperature rating
• Highly impermeable to water
• Non-hardening and non-cracking waterproof covering
• Excellent resistance to Acids, Alkalis, and Salts

Uses and Applications

Atmospheric Uses: Structural steel, flanges & valves, sweating lines, tank bases, pipe crossing, cooling tower piping, and under thermal insulation

Buried Uses: Flanges & valves, pipe, weld joints, pipe couplings, pipe penetrations, cadwelds, bolted fittings, ductile/castiron pipe.

Marine Uses Steel piles, timber piles, flanges & valves, submarine pipeline repairs, pipe hangers, concrete piles, risers, under deck piping, offshore platforms, H-piles, tie rods & end connections, hydraulic fittings, deck hardware.

Commercial and Residential Uses: plumbing connections, cooling tower piping, cable splices, roof repairs, waterproofing & sealing, threaded connections, battery terminals, trays & tie downs, trailer axles & U-bolts,  snowplows, and sanders, tractors, wood splitters, dock hardware, and seasonal equipment storage for corrosion prevention. Excellent for protecting equipment from harsh winter weather to humid or wet environments.

Application - No training or experience necessary.

This product does not contain any substance classified as hazardous to health.

This product has no significant environmental hazards when in use