By continuing use this site, you agree to the Terms & Conditions and our use of cookies.
      Hylomar Universal Blue
      • Hylomar Universal Blue
      • Hylomar Universal Blue
      • hylomar universal blue
      • hylomar universal blue

      Hylomar Universal Blue


      Hylomar Universal Blue is the oldest and most popular of the Hylomar series of sealants.  Hylomar Universal Blue is a high-performance, non-setting gasket, and jointing compound. The compound is resistant to a wide range of fluids including:

      1. Industrial fluids
      2. Oils
      3. Petroleum and synthetic diester lubricating oils
      4. Gasoline and kerosene
      5. Water/glycol and methanol/water mixtures
      6. Air
      7. Turbine and piston engine combustion products

      Pack sizes – 40g tube (blister card), 40g tube (carton), 100g tube (carton), 350g (cartridge).


      • Non–hardening and non–setting
      • Non–flammable
      • Unlimited assembly time
      • Wide operating temperature ( -50°C to +250°C)
      • Allows metal to metal contact
      • Available as light, medium, and heavy viscosity product
      • The non-setting feature allows easy dismantling of components for service and repair work
      • Use as a non-curing thread sealant
      • Resists vibration
      Size (g) :
      Quantity :

      Last time this product was added to a cart: 07/02/2021

      Allowed extensions: .pdf, .png, .jpeg, .gif, .jpg,
      • Secured
      • Fast Delivery
      • 7 days Return

      Hylomar Universal Blue is the oldest and most popular of the Hylomar series of sealants.  Hylomar Universal Blue was originally developed in the 1960s by Rolls-Royce Plc to help seal against synthetic lubricants that were used in early jet engines. Years ago this original Hylomar formula was commonly known as either PL32 L, M, or H (Light, Medium, or Heavy grade). Some users were also familiar with the older Rolls-Royce internal part number of SQ32. However, per various changes in the Rolls-Royce requirements, the PL32 designation was removed in the mid-1990s and the product was renamed "Universal Blue". The PL32 designation is now associated with the newer "Aerograde PL32M" or "Aerograde Ultra PL32A" formulations.

      Hylomar Universal Blue

      The leading non-setting gasket & jointing compound is available today. The product can be used to replace a traditional gasket or to “dress” it to significantly improve the performance of the gasket.

      • Non-hardening
      • Wide operating temperature range (-50 to +250ºC)
      • Fuel resistant

      Pack size – 40g tube (blister card), 40g tube (carton), 100g tube (carton), 350g (cartridge).


      • Inlet manifolds
      • Timing case covers
      • Gearbox and transmission components
      • Thread sealing
      • Water and oil pumps
      • Instrument inspection covers
      • Cylinder heads
      • Flat rigid sumps
      • Most machined surfaces
      • Gas turbines
      • Water-cooled generators
      • Turbo vacuum systems


      Temperature range: -50°C to +250°C (-58°F to 482°F)


      Film Thickness: 0.015 mm

      Typical Surface Finish: 2.0 μm Ra

      Area covered by 100g: 1.875m²

      Product coverage after drying: 2mg/cm²


      Film Thickness: 0.03 mm

      Typical Surface Finish: 3.0 μm Ra

      Area covered by 100g: 1.275m²

      Product coverage after drying: 4mg/cm²


      Film Thickness: 0.09 mm

      Typical Surface Finish: 3.5 μm Ra

      Area covered by 100g: 0.56m²

      Product coverage after dying: 12mg/cm²


      Specific References

      New product


      Hylomar Universal Blue

      Hylomar Universal Blue Data Sheet

      Download (122.33k)
      Andrew U07/06/2020
      Genuine industrial Product.

      This product is genuine without any form of adulteration its tested and trusted, i recommend it for all industrial usage, No cause for alarm you are Always Secured with Industrial Safety Nigeria product and services.

        Write your review
        Hylomar Universal Blue
        Hylomar Universal Blue

        Hylomar Universal Blue

        Allowed extensions: .pdf, .png, .jpeg, .gif, .jpg,