By continuing use this site, you agree to the Terms & Conditions and our use of cookies.
      Molykote P 37 Lubricant Paste
      • Molykote P 37 Lubricant Paste

      Molykote P 37 Lubricant Paste

      Molykote
      Reviews(1)

      MOLYKOTE P 37 Lubricant paste

      Extremely pure, solid lubricant paste for bolted joints. It contains no lead, nickel, sulphur, chlorine or fluorine.

      Temperature resistant upto 1400 degrees Centigrade.

      Quantity :
      testtesttest
      Allowed extensions: .pdf, .png, .jpeg, .gif, .jpg,
      • Secured
      • Fast Delivery
      • 7 days Return

      Molykote P 37 APPLICATIONS:

      MOLYKOTE P 37 is Suitable for screws, nuts and bolts that are subjected to extremely high temperatures and which are made of heat-resistant or extremely heat resistant steels, eg those made from nickel-based alloys.

      Used successfully for the bolted joints of gas and steam turbines in power stations.

      Molykote P 37 FEATURES:

      • Highly pure (less than 500mg of sulphur, less than 200mg of chlorine and fluorine per kg of lubricant)

      • Molykote P 37 can be used at temperatures up to 1400 Degrees Centigrade

      • Coefficient of friction in the range of oiled bolts

      • Low scatter of prestressing force on tightening

      • Molykote P 37 Avoids stress cracks and solder brittleness

      • Molykote P 37 Enables non-destructive loosening of bolted joints even after long use at high temperatures

      Molykote P 37 SPECIFICATIONS:

      • Complies with Siemens TLV 9600 02/01

      • Complies with General Electric TIL 1117-3RI

      • Complies with EDF-PMUC 04034

      • Complies with Pratt & Whitney PWA-36246

      Molykote P 37 COMPOSITION:

      Solid lubricants in practically sulphur free, Partly synthetic oil, Thickener, Adhesion improver,

      Technical Specifications of Molykote P 37

      • Color : Grey-Black

      • Penetration density Tested As per : ISO 2137 - Unworked penetration -mm/10 - 280-310 & ISO 2811 Density at 20 degrees Centigrade (68°F) g/ml 1.2

      • Service temperature : -40 to 1400 Degrees Centigrade ( -40 to 2552 FT )

      • Load-carrying capacity, wear protection, service life

      • DIN 51 350 T.4 Weld load N 4400

      • DIN 51 350 T.5 Wear scar under 800N load mm 1.7

      Coefficient of friction

      • Screw test - μ thread square 2 0.15

      • Screw test - μ head square 2 0.09

      Initial breakaway

      • torque Cube per Nm 126

      • How to apply Molykote P 37

      Clean the thread with solvent. Clean already used bolts with a wire brush. Spread an adequate amount of this product up to the root of the thread in order to obtain a good seal. For this purpose use the brush from the brush can, provided it has not been used previously for other purposes. Otherwise use a new brush.

      Molykote

      Specific References

      Andrew U06/25/2021
      Quality

      For quality, genuineness, fast delivery and good customer support, I recommend industry safety Nigeria as No: 1 in meeting all of that need

        Write your review
        Molykote P 37 Lubricant Paste

        10 other products in the same category:

        Molykote P 37 Lubricant Paste

        Molykote P 37 Lubricant Paste

        Allowed extensions: .pdf, .png, .jpeg, .gif, .jpg,