By continuing use this site, you agree to the Terms & Conditions and our use of cookies.
      Seacare OSD-2 Oil Spill Dispersant is a biodegradable hydrocarbon based product with high dispersing efficiency and low toxicity
      • Seacare OSD-2 Oil Spill Dispersant is a biodegradable hydrocarbon based product with high dispersing efficiency and low toxicity

      Seacare OSD 25 ltr

      Reviews(2)

      Unitor™ Seacare OSD-2™ is a biodegradable hydrocarbon based product with high dispersing efficiency and low toxicity. It is approved as a Type I dispersant according to LR448 specifications by the Department for Environment, Food & Rural Affairs (DEFRA) formerly UK Ministry of Agriculture, Fisheries and Food (MAFF).

      Quantity :
      testtesttest

      Last time this product was added to a cart: 06/12/2023

      Allowed extensions: .pdf, .png, .jpeg, .gif, .jpg,
      • Secured
      • Fast Delivery
      • 7 days Return

      Product information

      This product supersedes product no: 571562

      Unitor™ Seacare OSD-2™ is a biodegradable hydrocarbon based product with high dispersing efficiency and low toxicity. It is approved as a Type I dispersant according to LR448 specifications by the Department for Environment, Food & Rural Affairs (DEFRA) formerly UK Ministry of Agriculture, Fisheries and Food (MAFF).

      Definition
      Type I: Conventional hydrocarbon-base - for use primarily undiluted on beaches, but may also be used undiluted from WSL spray sets using breaker boards or other suitable means of application and agitation.

      Department for Environment, Food & Rural Affairs (DEFRA)

      APPROVAL OF THE USE OF SUBSTANCES PRODUCED FOR THE PURPOSE OF TREATING OIL ON THE SURFACE OF THE SEA

      Notes for guidance 1. Article 3 of the Deposits in the Sea (Exemptions) Order 1985 as read with paragraph 21 of the Schedule to it, provides that a licence is not needed under Part II of the Act to deposit any substance produced for the purpose of treating oil on the surface of the sea provided you meet the following conditions:

      • The substance is one, the use of which, is for the time being approved by the licensing authority; • The substance is used in accordance with any conditions to which the approval was subject; • No deposits made in an area of the sea of a depth of less than 20 metres or within one mile of any such area, save with the approval of the licensing authority; • Similarly a licence is not needed (if conditions are satisfied) for the loading of a vessel aircraft, hovercraft, marine structure or floating container in England and Wales, with products for deposit for the treatment of oil on the surface of the sea, within British Fishery limits (other than waters adjacent to Scotland).

      1. The Ministry of Agriculture, Fisheries and Food has tested this product for toxicity and found it to be satisfactory at the specified application rate. It has also been tested for efficiency and safety in use by AEA Technology Pic. And similarly found to be satisfactory.

      2. A person who deposits in the sea a substance not for the time being approved by the licensing authority for the purpose of treating oil on the surface of the sea or not within the terms of this approval, may be in breach of the terms of the Food and Environment Protection Act, 1985.

      3. A person who intends to use any substance for the purpose of treating oil on the surface of the sea should also consult the Nature Conservancy Council before beginning operations.

      4. Copies of the current Continental Shelf Operations Notice (CSON 7) are obtainable from the Department of Energy, Petroleum Engineering Division, Thames House South, Millbank, London SW1P 4QJ.

      Further information on the use of oil spill dispersants is contained in the Institute of Petroleum (London) publication "Guidelines on the Use of Oil Spill Dispersants" 2nd Edition (1988).

      Features

      • Approved Type I dispersant according to the latest LR448 specifications of AEA Technology Plc. covering both

        efficiency and toxicity for use in dispersing oil on sea, beaches and rocks

      • Disperses mineral oils, crude oils, residual fuel oils, diesel fuel oil, kerosene, white spirit and lubricant oils

      • For use on oil spills that may occur during loading or discharging of cargo or bunkers where allowed

      • For cleaning of spills on deck, ships side, piers, wharfs, etc. where allowed

      Benefits

      • Raised standards for operator safety in handling and use, being biodegradable and having low toxicity and a high flash point

      • Rapid efficient dispersal of a wide range of oil residues. Converts hydrocarbons into very fine emulsions

      • Ready to use product

      Specification

      General

      Invent Hazard Material (IMO/EU) classification C-49

      Physical properties

      Appearance

      Amber

      Density [g/ml]

      0,8

      Flash Point [°C]

      Above 61

      Form

      Liquid

      Technical data

      Compatibility

      Do not use together with natural rubber; may swell synthetic rubber

      Approvals

      • This composition meets the criteria for not being harmful to the marine environment according to MARPOL Annex V and may be discharged into the sea when used to clean cargo holds and external surfaces on ships.

      • Approved as a type I dispersants according to LR448 specifications by MMO (Marine Management Organisation) for oil spill treatment applications in the United Kingdom

      Directions for use

      Oil Spills at Sea

      Unitor™ Seacare OSD-2™ is used undiluted by direct spraying to clean up oil spills at sea. Allow some time for the oil to absorb the Unitor™ Seacare OSD-2™ and then disperse mixture by vigorous agitation using fire hoses, the ship's propeller, breaker boards towed behind work boats, etc. Unitor™ Seacare OSD-2™ should not be used in an area of sea of a depth less than 20 metres or within one mile of such areas exept in accordance with the advice of the local District Inspector of Fisheries of Ministry or Scottish Office Agriculture, Environmental and Fisheries Department (SOAEFD).

      Oil on Beaches and Shore Line
      Unitor™ Seacare OSD-2™ should be applied neat by spraying over oiled areas. Allow time for the oil to absorb the Unitor™ Seacare OSD-2™ then follow by washing down the beach or rocks, etc. The treatment rate depends on the type and thickness of the oil spill, also on the age and condition. Under conditions where it is a thin slick of oil, 1 litre of Unitor™ Seacare OSD-2™ is enough to treat approximately 10 square metres of oil. In many cases, several applications may be necessary.

      Oil Spill on Deck
      Remove as much of the oil as possible, then spray Unitor™ Seacare OSD-2™ over area covered by the oil and allow some time for it to be absorbed. Disperse the mixture with water by means of a fire hose. Depending on type of oil it may be necessary to use several applications.

      Specific References

      New product
      Andrew U07/06/2020
      Genuine industrial Product.

      This product is genuine without any form of adulteration its tested and trusted, i recommend it for all industrial usage, No cause for alarm you are Always Secured with Industrial Safety Nigeria product and services.

        Andrew U07/06/2020
        Genuine industrial Product.

        This product is genuine without any form of adulteration its tested and trusted, i recommend it for all industrial usage, No cause for alarm you are Always Secured with Industrial Safety Nigeria product and services.

          Write your review
          Seacare OSD 25 ltr
          Seacare OSD-2 Oil Spill Dispersant is a biodegradable hydrocarbon based product with high dispersing efficiency and low toxicity

          Seacare OSD 25 ltr

          Allowed extensions: .pdf, .png, .jpeg, .gif, .jpg,