Cold Wash HD 25LTR

Cold Wash HD 25LTR

No reward points for this product.


Coldwash HD is a heavy duty degreaser based on petroleum solvents, emulsifying agents and surfactants. The product is excellent for removing oil contamination from machinery, engine parts and bilges. It is very easy to use as it splits after cleaning, releasing the oil phase for reclamation.

More details...

0

6001

Availability : Available

Features

  • Emulsifying agents are biologically degradable
  • Does not contain nonyl phenol ethoxylates or other estrogenic compounds
  • Effective on mineral oils and petroleum based residues
  • Safe to use on most metal surfaces and painted surfaces
  • Removes oil contamination from machinery, engine parts and bilges
  • Allows soak cleaning of machinery parts

Benefits

  • Easy to recover as it splits after cleaning, releasing the oil phase
  • Powerful degreaser with quick penetration and good emulsifying properties
  • Rapid rinsing, leaves clean and oil-free surfaces

Splits after cleaning, releasing the oil phase for reclamation. Powerful degreaser with quick penetration and good emulsifying properties. The emulsifying agents in this product are biological degradable. Does not contain nonyl phenol ethoxylates or other estrogenic compounds. Effective on mineral oils and petroleum based residues. Safe to use on most metal surfaces and painted surfaces. Removes oil contamination from machinery, engine parts and bilges. Soak cleaning of machinery parts. Rapid rinsing, leaves clean and oil-free surfaces.

Directions for use

This product is excellent for use on soiled surfaces, bilges and machinery parts.

This degreaser must be applied neat with a brush, by hand spray, immersion, soaking etc. The contact, or soaking, time should be between 15 minutes to 2 hours before washing off with hot or cold water. Hot water will improve the result of the cleaning.

Spot cleaning

Spray neat Coldwash HD onto surfaces to be cleaned. The contact time should be at least 30 minutes or up to 2 hours if time allows. Bulkheads/walls can be washed down by use of high pressure cleaning machines. The best result is achieved with hot water between 60–80°C.

Spray method

Spray Coldwash HD neat onto soiled surfaces. The contact time should be between 15–30 minutes, and then wash off with water. To clean stubborn deposits, mechanical agitation such as scrubbing will improve the cleaning.

Soak method

Immerse the parts to be cleaned into a bath of neat Coldwash HD for 30 minutes, and then wash off with water.

Circulation method

Cleaning of equipment such as lube oil heat exchangers, fuel oil preheaters and filters can be accomplished by circulating neat Coldwash HD.

Further Technical data

Form

Liquid

Appearance

Clear brown

Density

0,90

Flash Point

Above 61 oC

Not Compatible

May swell rubber and synthetic rubber.

Product number: 571430

You can call our order hotline 08064338888 for order proceedings or our office number 013428636 or send us an email to sales@safetynigeria.com 

Write your review

Cold Wash HD 25LTR

Cold Wash HD 25LTR

Coldwash HD is a heavy duty degreaser based on petroleum solvents, emulsifying agents and surfactants. The product is excellent for removing oil contamination from machinery, engine parts and bilges. It is very easy to use as it splits after cleaning, releasing the oil phase for reclamation.

Write your review

Path: > Cold Wash HD 25LTR

30 other products in the same category :