Measuring Equipments

Viewed products

Buy up to 10 and get 10% discount

Fluke 87V/IMSK Industrial Multimeter Service Combo Kit

No reward points for this product.


Fluke 87V/IMSK Industrial Multimeter Service Kit Includes:

  • Fluke-87V Multimeter with temperature frequency, capacitance 250 µs peak min-max
  • Fluke-i400 AC 400A Current Clamp
  • 80BK-A thermocouple bead probe
  • TL75 test leads
  • AC72 alligator clips
  • Limited lifetime warranty on Fluke-87V and 1-year warranty on accessories

More details...

Fluke 87V/IMSK Industrial Multimeter Service Kit Includes:

  • Fluke-87V Multimeter with temperature frequency, capacitance 250 µs peak min-max
  • Fluke-i400 AC 400A Current Clamp
  • 80BK-A thermocouple bead probe
  • TL75 test leads
  • AC72 alligator clips
  • Limited lifetime warranty on Fluke-87V and 1-year warranty on accessories

Specifications
Voltage DCMaximum Voltage1000 V
Accuracy±(0.05% + 1)
Maximum Resolution10 µV
Voltage ACMaximum Voltage1000 V
Accuracy±(0.7% + 2) True RMS
AC Bandwidth20 kHz with low pass filter; 3 db @ 1 kHz
Maximum Resolution0.1 mV
Current DCMaximum Amps10 A (20 A for 30 seconds maximum)
Amps Accuracy±(0.2% + 2)
Maximum Resolution0.01 µA
Current ACMaximum Amps10 A (20 A for 30 seconds maximum)
Amps Accuracy±(1.0% + 2) True RMS
Maximum Resolution0.1 µA
ResistanceMaximum Resistance50 MΩ
Accuracy±(0.2% + 1)
Maximum Resolution0.1 Ω
CapacitanceMaximum Capacitance9,999 µF
Accuracy±(1% + 2)
Maximum Resolution0.01 nF
FrequencyMaximum Frequency200 kHz
Accuracy±(0.005% + 1)
Maximum Resolution0.01 Hz
Duty CycleMaximum Duty Cycle99.9%
Accuracy±(0.2% per khz +0.1%)
Maximum Resolution0.1%
Temperature Measurement-200.0°C - 1090°C
-328.0°F - 1994.0°F
excluding probe
80 BK Temperature Probe-40.0°C - 260°C
-40.0°F - 500°F, 2.2°C or 2% whichever is greater
ConductanceMaximum Conductance60.00 nS
Accuracy±(1.0% + 10)
Maximum Resolution0.01 nS
DiodeRange3 V
Resolution1 mV
Accuracy±(2% + 1)
Duty Cycle RangeAccuracyWithin ±(0.2% per kHz + 0.1%)
Environmental Specifications
Operating Temperature-20°C to +55°C
Storage Temperature-40°C to +60°C
Humidity (Without Condensation)0% - 90% (0°C - 35°C)
0% - 70% (35°C - 55°C)
Operating Altitude2000 m
Safety Specifications
Overvoltage categoryEN 61010-1 to 1000 V CAT III, 600V CAT IV
Agency ApprovalsUL, CSA, TÜV, VDE listed
Mechanical and General Specifications
Size201 x 98 x 52 mm (with holster)
Weight355 g
624 g - with holster
DisplayDigital6000 counts updates 4/sec.
19,999 counts in high-resolution mode
Analog32 segments, updates 40/sec.
Frequency19,999 counts, updates 3/sec at > 10 Hz
WarrantyLifetime
Battery LifeAlkaline~400 hours typical, without backlight
Shock1 Meter drop per IEC 61010-1:2001
VibrationPer MIL-PRF-28800 for a Class 2 instrument

Fluke i400 AC Current Clamp

Specifications
Nominal current range400 A
Continuous current range1 A - 400 A
Maximum non-destructive current1000 A
Lowest measurable current1 A
Basic accuracy2% + 0.06 A
(45-400 Hz)
(% reading + floorspec)
Useable frequency5 Hz - 20 kHz
Output level(s)1 mA/A
Safety Specifications
SafetyCAT IV 600 V, CAT III, 1000 V
Maximum voltage1000 V AC rms from earth to ground, in compliance with EN61010
Mechanical and General Specifications
Warranty1 year
Maximum conductor diameter32 mm (1.25 in)
Maximum conductor size (busbar)750 MCM
Output cable length1.5 m (59 in)
Shrouded banana plugsYes

Write your review

Fluke 87V/IMSK Industrial Multimeter Service Combo Kit

Fluke 87V/IMSK Industrial Multimeter Service Combo Kit

Fluke 87V/IMSK Industrial Multimeter Service Kit Includes:

  • Fluke-87V Multimeter with temperature frequency, capacitance 250 µs peak min-max
  • Fluke-i400 AC 400A Current Clamp
  • 80BK-A thermocouple bead probe
  • TL75 test leads
  • AC72 alligator clips
  • Limited lifetime warranty on Fluke-87V and 1-year warranty on accessories

Write your review

30 other products in the same category :